180 KHz Shear Wave Transducer
Ultrasonic transducer is designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output.
Product Information
Specifications
Enquiry
- Two Shear Wave Transducers units are required for proper operation
- Line the flat face of each transducer so that the internal polarized crystals are in alignment
- Material to be tested should have a surface area larger than the diameter of the transducer, ie. at least 50mm wide
- These Transducers should be used on the same surface on material to be tested, ie. in indirect mode
- The listed price includes a pair of transducers (2 units). Pricing is not for a single transducer.
Used to test coarse grained materials such as concrete pours, rock, other large structural objects as well as core samples.
| Uses | Finding non-homogeneous conditions of a surface Used for concrete, wood and rock (small samples only) |
| Weight | 417 g / 0.92 lbs. |
| Case Dimensions | Diameter 50 mm x Length 60 mm (1.97 in. x 2.33 in.) |
| Housing | Stainless steel, ruggedised |
| Element | Piezoelectric ceramic |
| Frequency | 180 kHz centre |
| Operating Temperature | -10 to 40°C |
| Excitation | Typically HV 1000 V @ 5 µs; LV 600 V @ 5 µs |
| Other Features | Side connectors to facilitate applying pressure to the transducer face in the field |
Help me choose the right product...
