Most Advanced System For Compressive Strength Testing of Standard and High Performance Concrete
Windsor Probe™ Test System
For in-place strength testing of normal and high-performance concrete.
- Form Removal
- Structural Analysis
- Light-weight concrete strength determination
- Standard concrete strength determination
- High-strength concrete strength determination
- High-precision determination
Measures the compressive strength of concrete accurately and effectively, on-site in the field.
The Windsor HP Probe™ system rapidly and accurately determines the concrete compressive strength of a structure by driving a probe into the concrete with a known amount of force. Improved and enhanced over thirty years, this modern system is capable of measuring concrete with a maximum compressive strength of 17,000 PSI (110MPA). It has been ruggedized for use in the construction environment, yet refined to provide the user with a simpler system to operate. An electronic measuring unit has been added to help ensure proper test results which can be recorded for later review or uploading to a personal computer.
Two probe styles are available: one for lightweight, low density concrete with air filled aggregate and the other probe for more standard mix designs. Also, two standard power settings facilitate testing fresh concrete as well as mature mixes.
The Windsor Probe™ test has been approved by federal, state and municipal agencies as well as a number of foreign countries in Asia and Europe. It conforms to the following tests, specifications and practices:
ASTM C803 / ACI 347-78 / ANSI A.10-3 / BS 1881 Part 207
Features & Benefits:
New electronic measuring system enhances accuracy and efficiency
Measurement to 17000 psi (110 MPa)
Memory for data storage and uploading to PC
Safe: no accidental discharge and no recoil
Fast and economical use
Determines the developing strength of concrete; improves safety, ensures quality and reduces
Monitors the strength for rehabilitation as concrete ages
Conforms to ASTM C-803 and other official tests
The Windsor HP System does not require great skill to use, plus consistent results can be obtained by construction site supervisory staff or field technicians. In fact, among its users are: contractors, engineers, architects, testing laboratories, ready mix concrete producers, owners, managers and government authorities. This system has widespread use in testing concrete in-situ; on conventionally placed, sprayed or precast concrete; on horizontal or vertical slabs; on floors or overhead; on fresh or mature concrete.
The system is safe to use. The driver cannot be discharged unless it is fully depressed with some force against the actuating template which rests against the surface being examined.
The Windsor HP Probe™ System is designed to evaluate the compressive strength of concrete in place. It is non-destructive and can be used with equal effectiveness on fresh and mature concrete. Equally accurate results are obtained on horizontal or vertical surfaces provided that the probe is perpendicular or at right angles to the test surface.
A hardened steel alloy probe is propelled at high speed by an exactly measured explosive charge into the concrete and its penetration measured. Each power load is guaranteed to have an energy level to give an exit muzzle velocity tolerance within Â±3%. The compressive strength of the concrete is directly related to the resistance to penetration of the crushed aggregate and cement matrix: this is determined by the distance required to absorb the specific amount of kinetic energy of the probe. The compressive strength of the concrete is empirically related to the penetration that varies with the hardness of the aggregate. This relationship is recognized by determining the Moh’s scale of hardness of the aggregate and applying a correction factor to the penetration.
The combined contributions of both the aggregate and the cement paste to concrete strength are examined by the test. The accuracy of the inferred strengths has been examined in many independent tests and trials. The Windsor HP results correlate well with the concrete strength determinations obtained by conventional means.
For most accurate test results ASTM recommend so that a correlation be developed for the particular mix design being tested. Exact duplication of cylinder test results should not be expected. The probes measure the strength of the actual concrete in a structure rather than that of a sample compacted and cured under strict and somewhat artificial conditions which do not necessarily represent those of the structure itself.