Cyber-Plus 8 Evolution “Touch-Screen”

///Cyber-Plus 8 Evolution “Touch-Screen”
SKU: B044N-SET

Cyber-Plus 8 Evolution “Touch-Screen”

Acquisition and data processing system. 8 channels.
Developed for the implementation and upgrading of any type of
existing machines (even not manufactured by Matest) applicable to:
– Marshall mechanical load frame mod. B042 KIT.
– CBR/Marshall 2 speeds load frame mod. S213N.
– CBR loading machine motorized mod. S211 KIT.
Cyber-Plus 8 Evolution allows:
– Acquisition up to 8 analogical/digital channels: load cell and linear
displacement potentiometric vertical and/or horizontal transducers.

To perform the following tests:
MARSHALL: EN 12697-34 / ASTM D1559 / CNR N. 30
NF P98-251-2 / BS 598 :107
– INDIRECT TENSILE TEST: EN 12697-23 / ASTM D4123
– DETERMINATION OF THE WATER SENSIBILITY OF BITUMINOUS
SPECIMENS: EN 12697-12
– CBR TEST: EN 13286-47 / CNR / UNI 10009
ASTM D1883 / BS 1377 / NF P94-078.
– UNCONFINED TEST: ASTM D2166
– Remote control of the digital unit through PC and UTMII software

Hardware specifications:
– 8 indipendent channels available for the load cells or potentiometrics
transducers or strain gages for load, deformation or
displacement measurements..
– Stabilized power supply of the analogical channels:
5 Vcc and 3 Vcc
– Analogue input: +/- 20 mV and +/-5 V
– Nominal resolution: 24 bit.
– Acquisition up to 200 readings for each channel.
– Safety discrete On/off output
– Graphic display ¼ VGA colour Touch-Screen.
– Time and calendar system

Firmware specifications:
– Instant visualization of the load measured by an extensometric
cell.
– Instant visualization of the deformation measured by 4 linear
displacement transducers.
– Visualization of the graphic of the test.
– Visualization of date and time.
– Semi-automatic configuration and calibration of all transducers
connected.
– 20 steps lining that can be set by the enduser.
– Automatic correction of the axis origin for CBR/Marshall tests.
– Automatic calculation and visualization of all the results according
to the Standard.
– Setting of all the parameters for test: alarms, zero threshold, endtest
percentage, calculation parameters.
– Time/date and language selection (Italian, English, French, German,
Spanish, Polish).
– Unlimited file for each type of test
– Symbols of pushbuttons functions
– Informative messages (planning alarms, load cell and strain transducer
setting, etc.)
– Safety function for automatic machine stop at max. reached load
and deformation of the strain transducer.

Printing of the results on the incorporated thermal graphic printer (accessory C127N). Transfer and management via Ethernet of the filed data or real-time.Hardware technical details: see pag. 24

B044N-SET is composed by:
B044N
CYBER-PLUS 8 EVOLUTION, Unit for data acquisition, as described
Power supply: 230V 1F 50/60Hz
S337-34
LOAD CELL, 50kN capacity, with high precision strain transducers,
complete with cable and connector
S336-14
LINEAR DISPLACEMENT TRANSDUCER, 50mm stroke, independent
linearity +/- 0,1% complete with cable and connector
Accessories for fixing the load cell and transducer to the test
machine.

B043-02N
SOFTWARE UTM2 (Universal Testing Machine 2)
Licence for INDIRECT TENSILE STRENGTH
Standards: EN 12697-23 / CNR N. 134 / ASTM D4123

The system is supplied fully calibrated with calibration certificate,
and ready for use.
Every item can be ordered separately.

ACCESSORIES:
B043-01N
SOFTWARE UTM2 (Universal Testing Machine 2)
Licence for MARSHALL test
Data processing program for “X-Y STABILITY/FLOW”
Standards: EN 12697-34 / CNR N. 30 / ASTM D1559
BS 598 :107 / NF P98-251-2

S218N
SOFTWARE UTM2 (Universal Testing Machine 2)
Licence for CBR Test
Standards: EN 13286-47 / CNR/UNI 10009 / ASTM D1883
BS 1377 / NF P94-078

S218-01N
SOFTWARE UTM2 (Universal Testing Machine 2)
Licence for UNCONFINED Test
Standards: ASTM D1883
Description and technical details of Software UTM2: see pag. 14

C127N Graphic printer on thermo paper on board.
H009-01
PERSONAL COMPUTER, complete with LCD monitor 22”, keyboard,
mouse, connection cables, installation and setting up of the
purchased software.
C128 Laser printer for test certificate and graphics printing
with direct connection to CYBER-PLUS 8